Omron NX-ILM400, Руководство пользователя

Страница: 62 / 176

4 Installation and Wiring
4 - 4 NX-series IO-Link Master Unit User’s Manual (W567)
Additional Information
• Normally, it is not necessary to release the DIN track mounting hook when you mount the NX
Unit. However, if you mount the NX Unit on a DIN Track that is not a recommended DIN
Track, the DIN track mounting hook may not lock correctly. If that happens, first unlock the
DIN track mounting hook, mount the NX Unit to the DIN Track, then lock the DIN track mount-
ing hook.
• Refer to the hardware user’s manual for the CPU Unit to which NX-series Units are con-
nected for information on how to mount the CPU Unit and how to mount NX Units to the CPU
Unit.
• Refer to the user's manual for the Communications Coupler Unit for information on how to
mount the Communications Coupler Unit, and how to mount the NX Unit to the Communica-
tions Coupler Unit.
You can attach markers to the NX Units to identify them.
The plastic markers made by OMRON are installed for the factory setting. The ID information can be
written on them.
Commercially available markers can also be installed.
Replace the markers made by OMRON if you use commercially available markers now.
The marker attachment locations vary depending on the type of the external connection terminals on
the NX Units.
4-1-2 Attaching Markers
External connection terminals on NX Units Marker attachment location
Screwless clamping terminal block NX Unit and terminal block
M3 screw terminal block
MIL connector
NX Unit only
Fujitsu connector
A marker that is attached
to the NX Unit
A marker that is attached
to the terminal block