![background image](http://html1.mh-extra.com/html/omron/nx-ilm400/nx-ilm400_user-manual_742779164.webp)
Appendices
A - 38
NX-series IO-Link Master Unit User’s Manual (W567)
A-6 Version Information with Communica-
tions Coupler Units
This section provides version-related information when connecting Units to a Communications Coupler
Unit.
Version information is provided separately for each Communications Coupler Unit that an NX Unit is
connected to.
This section describes the relationship between the unit versions of each Unit, EtherCAT Coupler Unit,
CPU Unit and Industrial PC, versions of the Sysmac Studio and CX-ConfiguratorFDT, and the specifica-
tion changes for each unit version.
The version combination table is given below.
• With the combinations of the unit versions/versions shown below, you can use the functions that are
supported by the unit version of the Unit model. Use the unit versions/versions (or the later/higher
unit versions/versions) that correspond to the NX Unit models and the unit versions. You cannot use
the specifications that were added or changed for the relevant NX Unit models and the unit versions
unless you use the corresponding unit versions/versions.
• Depending on the type and model of the Unit to which the NX Unit is connected, some Units do not
have the corresponding versions given in the table. If a Unit does not have the specified version, sup-
port is provided by the oldest available version after the specified version. Refer to the user's manu-
als for the specific Units for the relation between models and versions.
• If you use the corresponding unit versions/versions given in the following table or later/higher ver-
sions, refer to the version information in the user’s manual for the Communications Coupler Unit,
CPU Unit, and Industrial PC.
A-6-1
Connection to an EtherCAT Coupler Unit
Relationship between Unit Versions of Units
NX Unit
Corresponding unit version/version
Model
Unit version
EtherCAT Cou-
pler Unit
CPU Unit or
Industrial PC
Sysmac Studio
CX-Configura-
torFDT
Model numbers
of NX Units.
Unit versions of
NX Units.
Unit versions of
EtherCAT Cou-
pler Units that
are compatible
with the NX
Units.
Unit versions of
NJ/NX-series
CPU Units or
NY-series
Industrial PCs
that are compat-
ible with the Eth-
erCAT Coupler
Units.
Sysmac Studio
versions that
are compatible
with the NX
Units, Ether-
CAT Coupler
Units, CPU
Units, and
Industrial PCs.
The version of
the CX-Configu-
rat orFDT that
supports the
IO-Link Master
Unit.
NX Unit
Corresponding unit version/version
Model
Unit version
EtherCAT Cou-
pler Unit
CPU Unit or
Industrial PC
Sysmac Studio
CX-Configura-
torFDT
NX-ILM400
Ver.1.0
Ver.1.0
Ver.1.12
Ver.1.16
Ver.2.2
Ver.1.1
Ver.1.20
Содержание NX-ILM400
