Omron NSA12-15-TX11B, Руководство пользователя

Страница: 82 / 114

Appendix 1 BIOS Setup
Appendix 1-1 Using the Setup Menu
Appendix-2
Appendix
Appendix
Appendix 1 BIOS Setup
This section describes the procedure for using the BIOS setup menu of the
NSA-series Industrial PC. The screens shown in this document are only examples
and may differ slightly from the actual screens depending on the product.
Appendix 1-1 Using the Setup Menu
■
Starting Up and Exiting the BIOS Setup Menu
A Keyboard is required to set up the BIOS and access the BIOS menu.
Connect a USB keyboard.
A message box like the one shown below will be displayed at the bottom of the
screen when the system power supply is turned ON.
Logo Displayed:
Logo Not Displayed:
Press <F2> to enter SETUP.
1. Press the F2 Key while the message box is displayed to launch the setup menu.
2. The Main Setting Screen will be displayed.
Note: You must enter a password if one has been set.
3. Use the Down, Left, or Right Arrow Key to go to the next item and use the Enter
Key to select the item.
Note: Refer to Appendix 1-5 Main Menu for details on individual screens.
Select the Exit Screen to exit from the setup menu.
Note: Refer to Appendix 1-11 Exit Menu for details on exit options.
Note
The RAS Board’s startup monitoring is performed even during BIOS setup. Disable the
startup monitoring function when making the BIOS settings. If the startup monitoring
function cannot be disabled, turn ON pin 8 of the DIP switch to disable the Action on
Error function.