Omron NB10W-TW01B, Руководство по эксплуатации

Страница: 242 / 548

3 Functions of NB-Designer
3-200 NB-series Programmable Terminals NB-Designer Operation Manual(V106)
(5) Place one text display component to display
“
Basic window 0
”
in the Basic window 0 as
below. Also place [Pop-up Screen] function key to display
“
Pop-up window 7
”
and
[Backward] function key in the Basic window 0.
(6) Place one Text Display component to display
“
Basic window 4
”
and [Backward] function key
in the Basic window 4.
(7) Create three Function Keys in the [Fast select window 5].
Three Function keys such as a [Change Common Sheet] Function Key to switch Common
Sheet into Common window 1, a [Change Common Sheet] Function Key to switch Common
Sheet into Common window 6, and [Change Menu Screen] Function Key to switch Menu
Screen into Fast select window 2 as follows.
(8) Place one Text Display component to display
“
Common window 6
”
in the Common window
6.
(9) Place three Function Keys in
“
Pop-up Screen
”
in Pop-up window 7. Three Function Keys
such as one [Title bar on Pop-up Screen] Function Key to display
“
Pop-up window 7
”
, a
[Minimize] Function Key, and one [Close Screen] Function Key.
(10)After the completion of setup, saving the project file and executing the off-line test after the
compilation, the project is displayed as below.
(11)When switching the
“
Basic window 0
”
into
“
Basic window 4
”
by the button in Menu Screen,
pressing
“
Back
”
button allows the screen returned to
“
Basic window 0
”
and then pressing
“
Back
”
button in the Basic window 0 allows the screen returned to
“
Basic window 4
”
.
(12)When [Pop-up Screen] is pressed in
“
Basic window 0
”
,
“
Pop-up window 7
”
will pop up, as
the upper right graphics shown.