10
CLEANING
Be sure unit is OFF and the power cord is disconnected before cleaning.
Nebulizer Parts and Casing
(EXCEPT MESH CAP)
There are several ways to clean the medication cup
and mouthpiece.
A. Soak parts in a mixture of one part vinegar and
three parts distilled water for 30 minutes
B. Use a commercially available disinfectant
C. Parts may also be boiled for 10 minutes.
D. All parts must be rinsed thoroughly and air dried.
Clean the main unit casing using a cloth moistened
with water and a few drops of non-abrasive
cleanser. Wipe dry with a soft cloth.
■
NEVER clean with benzene, thinner or a
flammable chemical
The horn can be cleaned with vinegar. Moisten a
cloth with vinegar for surface cleaning. Mix one
part vinegar and three parts distilled water to be run
through for 45-60 seconds for internal horn cleaning.
1.
2.
3.
