63
1, 2, 3...
1. Press the Mode Key for more than one second while the
setup
setup menu
is displayed. The
func
operating mode setting will appear.
Set Value LED Display Model
Basic Model
2. Repeatedly press the Mode Key until the
=ro.ax
auto zero time of input A X
(mantissa) setting is displayed.
Set Value LED Display Model
Basic Model
3. Press the Shift Key to display the set value
9.9999
for changing. The PROG
indicator will flash.
Set Value LED Display Model
Basic Model
4. Press the Up and Shift Keys to set the value to
1.0000
. The input will be vali-
dated automatically if no change is made for five seconds. The
=ro.ax
auto
zero time of input A X (mantissa) setting will be displayed again.
Note
Press the Mode Key to enter the set value immediately. The auto zero
time of input A Y (exponent) setting will be displayed for setting the
next parameter.
Set Value LED Display Model
Basic Model
5. Press the Mode Key to display the
=ro.ay
auto zero time of input A Y (expo-
nent) setting.
Set Value LED Display Model
Basic Model
6. Press the Shift Key to display the set value
10 09
for changing.
Set Value LED Display Model
Basic Model
7. Press the Up and Shift Keys to set the value to
10 00
. The input will be vali-
dated automatically if no change is made for five seconds. The
=ro.ay
auto
zero time of input A Y (exponent) setting will be displayed again.
Setting Mode
Section 4-2
Содержание K3NR
