15
K3HB-C
Display
The display value can be set to the present value, the maximum
value, or the minimum value.
The present value display color can be set to green or red. The color
of the present value can also be switched according to the
comparative output.
When the input changes rapidly, the display refresh period can be
lengthened to control flickering and make the display easier to read.
The present measurement value can be displayed as a position in
relation to the scaling width on a 20-gradation position meter.
The input signal can be converted and displayed as any value.
Select whether or not to display the comparative value during
operation.
Automatically returns the display to RUN level when there are no key
operations (e.g., max./min. switching, bank settings using keys).
Other
Switch between 8 comparative value banks using the keys on the
front panel or external inputs. A set of set comparative values can be
selected as a group.
Any bank settings can be copied to all banks.
The measured value can be recorded when the power supply is
interrupted.
Display Value Selection
disp
Display Color Selection
color
Display Refresh Period
d.ref
Position Meter
pos-t
,
pos-h
,
pos-l
Prescale
ps.ax
,
ps.ay
,
ps.bx
,
ps.by
Comparative Set Value Display
sv.dsp
Display auto-return
ret
Bank Selection
bnk-c
Bank Copy
copy
Interruption Memory
memo
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
