Omron J7 series, Руководство пользователя

Страница: 48 / 177

34
Nomenclature
Chapter 3-1
3-1 Nomenclature
Note For safety’s reasons, the reset will not work while a RUN command (forward
or reverse) is in effect. Wait until the RUN command is OFF before resetting
the Inverter.
Appearance Name Function
Data display Displays relevant data items, such as frequency reference, output frequency,
and parameter set values.
FREQ adjuster Sets the frequency reference within a range between 0 Hz and the maximum
frequency.
FREF indicator The frequency reference can be monitored or set while this indicator is lit.
FOUT indicator The output frequency of the Inverter can be monitored while this indicator is lit.
IOUT indicator The output current of the Inverter can be monitored while this indicator is lit.
MNTR indicator The values set in U01 through U10 are monitored while this indicator is lit.
F/R indicator The direction of rotation can be selected while this indicator is lit, when
operating the Inverter with the RUN Key.
LO/RE indicator The operation of the Inverter through the Digital Operator or according to the
parameters set is selectable while this indicator is lit.
Note Note This status of this indicator can be only monitored while the
Inverter is in operation. Any RUN command input is ignored while this
indicator is lit.
PRGM indicator The parameters in n01 through n79 can be set or monitored while this
indicator is lit.
Note While the Inverter is in operation, the parameters can be only monitored
and only some parameters can be changed. Any RUN command input
is ignored while this indicator is lit.
Mode Key Switches the setting and monitor item indicators in sequence.
Parameter setting being made is canceled if this key is pressed before
entering the setting.
Increment Key Increases multi-function monitor numbers, parameter numbers, and
parameter set values.
Decrement Key Decreases multi-function monitor numbers, parameter numbers, and
parameter set values.
Enter Key Enters multi-function monitor numbers, parameter numbers, and internal data
values after they are set or changed.
RUN Key Starts the Inverter running when the CIMR-J7AZ is in operation with the
Digital Operator.
STOP/RESET Key Stops the Inverter unless n06 is set to disable the STOP Key.
Functions as a Reset Key when an Inverter error occurs. (See note.)
Data display
Keys
Indicators
Setting/Monitor item indicators
FREQ adjuster