Omron HD-1500 Platform, Руководство пользователя

Страница: 239 / 256

• Before driving the AMR down the ramp, ensure the Pendant speed knob is set at the lowest speed
and remains at that setting during the driving process.
• If the AMR is stopped on the ramp, do not release the brakes.
• Do not rotate the AMR while driving on the ramp.
The general unpacking steps are provided below.
1. Unpack the Power Supply Box.
Refer to A-1-1 Power Supply Box Shipping Crate Information on page A-3 for more information.
2. Unpack the battery.
Refer to A-1-2 Battery Shipping Crate Information on page A-4 for more information
3. Unpack the Docking Target.
Refer to A-1-3 Docking Target Shipping Crate Information on page A-5 for more information
4. Unpack the AMR.
Refer to A-1-4 AMR Shipping Crate Information on page A-6 for more information
A-1-1
Power Supply Box Shipping Crate Information
The shipping crate with Power Supply Box weighs a total of 174 kg. The overall dimensions are pro-
vided below.
1092 610
1454
Power Supply Box Unpacking Procedure
Use the following procedure to unpack the Power Supply Box from its shipping crate.
The following tools and equipment are required for this procedure.
• Personal Protective Equipment including eye protection, toe protection, and gloves.
• 13 mm socket with impact driver.
• 14 mm socket.
• Impact driver.
• Pry bar.
• Four safety-rated slings.
• Lifting device rated for at least 1100 kg capacity.
Appendices
A-3
HD-1500 Platform User's Manual (I645)
A-1
Unpacking
A
A-1-1 Power Supply Box Shipping Crate Information