manualshive.com logo in svg

Omron HD-1500 Platform, Руководство пользователя

Поделиться
Скачать
Omron HD-1500 Platform Скачать руководство пользователя страница 242

Docking Target Unpacking Procedure

Use the following procedure to unpack the Docking Target from its shipping crate.
The following tools and equipment are required for this procedure.
• Personal Protective Equipment including eye protection, toe protection, and gloves.
• 13 mm socket.
• Impact driver.
• Pry bar.

1

Remove the metal clips attaching the front panel to the housing crate using a pry bar.

2

Remove the front panel.

3

Remove the side screws attaching the crate housing to the base pallet using a 13 mm socket
and impact driver.

4

Remove the housing by pushing it away from the base pallet.

5

Loosen the strap securing the protective wood on top of the Docking Target. Once the strap is
loosened, remove the protective wood along with the strap.

6

Loosen the bolts nuts attaching the wooden board to the base pallet. Unstrap the protective
foam and remove the wooden board.
Take care not to damage or scratch the copper charging pads while removing the wooden
board.

7

Using the handles on each end, lift the Docking Target and place it on the floor.
After the Docking Target is placed on the floor, the procedure is complete.

A-1-4

AMR Shipping Crate Information

The shipping crate with the AMR weighs a total of 739 kg. The overall dimensions are provided below.

1969

1448

991

Appendices

A-6

HD-1500 Platform User's Manual (I645)

Содержание HD-1500 Platform

































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды