47
10. Care and Maintenance
10.1 Lists and Explanations of Messages
This section includes a list of all messages that may appear on the display. Refer
to these if you are not sure what a displayed message means.
Notice Messages
*1: Number of readings from 0 to 5. The number displayed represents the amount of copied ECG data.
*2: Number of readings from 1 to 300. The number displayed represents the amount of erased ECG
data.
Message
Description
Action
Analysing.
The ECG data is being analysed.
No action required. Wait until
analysis ends.
Can not measure.
Please follow the instructions
for use.
A ECG wave-pattern could not
be detected.
Check the instructions and
repeat measurement.
Measurement was stopped.
Push START to begin
measurement again.
The measurement was
interrupted or cancelled.
Press START to resume the
measurement.
Copied
*1
data into SD.
The indicated number of ECG
data has been copied to an SD
memory card.
No action required.
Wait until the message
disappears.
Erased
*2
data.
The indicated number of ECG
data has been erased.
HCG801-C1.fm Page 47 Wednesday, September 27, 2006 9:48 PM
