![background image](http://html1.mh-extra.com/html/omron/h7cr-11/h7cr-11_manual_741987025.webp)
H7CR
H7CR
25
Setting Mode
Changing Setting in the Function Setting Mode
1. Press the MODE key to switch from RUN mode to
SETTING mode.
The counter will continue
operation if switched from RUN
mode to function setting mode
during operation.
The MODE key will be locked if
the key protection function is
enabled.
Settings changed in the function
setting mode are not effective
until RUN mode is entered. As
the operating conditions will change in this case, always
reset operation with the RESET key or a reset input.
2. Press the MODE key to scroll successively through the
items that can be set. Release the MODE key to select the
desired item.
3. Changing the counting speed or another selected item:
Press the MODE key until the desired item appears.
Change the item setting by pressing increment keys 1 to 6.
Press the DISPLAY key to
return to RUN mode from
SETTING mode.
Precautions
25
Load
(mA DC)
20
15
10
Supply voltage (VDC)
■
EXTERNAL POWER SUPPLY
The capacity of the counter's external power supply is 50 mA at
24 VDC or 100 mA at 12 VDC. For models with 24 VAC/12 to
24 VDC specifications, loads must be established between the
following limits.
12 VDC
24 VDC
10
20
50
100
0