- 28 -
The displayed pulse width changes by
pressing this Key in the following order.
Note
• If multiple settings are required, repeat the steps
through .
• Yearly programs are added to weekly programs.
4-6
• All the start/end dates, ON time, and pulse width must be set. The maximum number
of yearly pulse-output operations that can be set is 4 for each output channel.
• It is possible to set the Time Switch to operate for only one day (i.e., the start
date is the same date as the end date).
• If one or more yearly programs have been set, the" " indicator light will
turn on in run mode whether the yearly program is performed or not.
• When the year is specified, do not set the start date and end date in reverse sequence.
• The set data will be cleared if the OUTPUT setting switch is moved between the
TIMER and PULSE positions after the data has been set.
Nu
m
ber of
re
m
aining steps
Press .
Specify the end date using ,
and . 2
If the starting year has been set to "
--
",
the ending year cannot be set.
Y
M
D
WRITE
Press .
Set the ON time with and .
2
h
m
WRITE
WRITE
Press to confirm the settings.
WRITE
1
If one or more programs have already been set, the display starts showing the set programs.
To add another program, press repeatedly until "
--.--
" is displayed.
2
Holding down these Keys rapidly advances the value.
WRITE
Set the Mode Switch to RUN.
⑧
• It is disable to specify February 29th of the leap-year when the year is not
specified. If you would like to set the operation by the last day of February
(February 28th or February 29th),please use the Season Switching(P.46).
the Key that was last pressed.
decrements the value of
Pressing HOLIDAY/
SELECT PRGM/
or
