B-54
Solid-state Multi-functional Timer
H3DE-M/-S
Specifications
■
General
Note:
Can be mounted to 35-mm DIN track with a plate thickness of 1 to 2.5 mm.
■
Time Ranges
Note:
When the main dial is set to “0” for all settings, the output will operate instantaneously.
■
Ratings
Note: 1.
DC ripple rate: 20% max.
2.
Since an inrush current of 0.25 A will occur when using the power supply voltage at 24 VDC, pay careful attention when turning on or off
the power supply to the Timer with a solid-state output such as a sensor.
3.
The power consumption is for mode A after the Timer counts the time-up time and for the AC input at 50 Hz. The power consumption of
the H3DE-M
@
includes the input circuit with the B1 and A1 terminals short-circuited.
Item
H3DE-M2
H3DE-M1
H3DE-S2
H3DE-S1
Operating mode
A: ON-delay (Signal or Power)
B: Flicker OFF start (Signal or Power)
B2: Flicker ON start (Signal or Power)
C: Signal ON/OFF-delay
D: Signal OFF-delay
E: Interval (Signal or Power)
G: Signal ON/OFF-delay
J:
One-shot (Signal or Power)
A: ON-delay
B2: Flicker ON start
E: Interval
J:
One-shot
Terminal block
Clamps two 2.5 mm
2
max. bar terminals without sleeves.
Terminal screw tightening
torque
0.98 N·m max. {approx. 10 kgf·cm max.}
Input type
Voltage input
---
Output type
Relay: DPDT
Relay: SPDT
Relay: DPDT
Relay: SPDT
Mounting method
DIN track mounting (see note)
Attachment
Nameplate
Approved standards
UL508, CSA 22.2 No.14
Conforms to EN61812-1, IEC60664-1 4 kV/2, VDE0106/P100
Output category according to IEC60947-5-1 (AC-13; 250 V 5A/AC-15; 250 V 3 A/DC-13; 30 V 0.1 A)
Time scale display
Time unit display
sec
min
hrs
10 h
x 0.1
0.1 to 1.2 s
0.1 to 1.2 min
0.1 to 1.2 h
1 to 12 h
x 1
1 to 12 s
1 to 12 min
1 to 12 h
10 to 120 h
Rated supply voltage
(see notes 1 and 2)
24 to 230 VAC/DC (50/60 Hz)
12 VDC (H3DE-M2 model only)
Operating voltage range
85% to 110% of rated supply voltage
Power reset
Minimum power-off time: 0.1 s
Reset voltage
2.4 VAC/DC max.
Power consump-
tion (see note 3)
H3DE-M1
AC: approx. 4.3 VA (2.2 W) at 230 VAC
DC: approx. 0.7 W at 24 VDC
H3DE-M2
AC: approx. 4.8 VA (2.4 W) at 230 VAC
DC: approx. 1.0 W at 24 VDC
H3DE-S1
AC: approx. 2.7 VA (1.6 W) at 230 VAC
DC: approx. 0.7 W at 24 VDC
H3DE-S2
AC: approx. 3.2 VA (1.9 W) at 230 VAC
DC: approx. 1.0 W at 24 VDC
Voltage input
Max. permissible capacitance between input lines (terminals B1 and A2): 2000 pF
Load connectable in parallel with inputs (terminals B1 and A2)
H-level: 20.4 to 253 VAC/DC
L-level: 0 to 2.4 VAC/DC
Control output
Contact output: 5 A at 250 VAC with resistive load (cos
φ
= 1)
5 A at 30 VDC with resistive load (cos
φ
= 1)
Ambient temperature
Operating:
−
10
°
C to 55
°
C (with no icing)
Storage:
−
25
°
C to 65
°
C (with no icing)
Ambient humidity
Operating: 35% to 85%
Содержание H3DE
Страница 2: ...52 Solid state Timer H3DE ...