Profinet Quick Start Guide
Set up communication to PLC CPU by way of Serial/USB connection
Enter PLC type and communication settings using ‘Configure’. Enter the PROFINET unit number (set
on front of unit) and press ‘Test’.
The IO Controller will respond with data in ‘Unit Information’
The IO Controller Setup allows user to specify name and IP address for network (leave as defaults if
unsure).
IO Device Setup
The IO Device names must be changed to those set in the ‘Network Scan’. This allows the IO
Controller to make initial communication by ‘name’ (using ARP) and thereafter set the IP Address
(using DCP). Therefore change from….
Rev 1.01
4 of 8
