![background image](http://html1.mh-extra.com/html/omron/grt1-crt-05-2008/grt1-crt-05-2008_operation-manual_742290104.webp)
85
Hardware Connections and Settings
Section 7-3
7-3
Hardware Connections and Settings
This section tells you how to install, connect, and set a SmartSlice I/O Termi-
nal.
7-3-1
Installing a SmartSlice I/O Terminal
You install a SmartSlice I/O Terminal on DIN Track.
Note
Refer to
3-1 Installing a SmartSlice I/O Terminal
on page 22 for information on
how to install a SmartSlice I/O Terminal.
7-3-2
Connecting the Communications Cables and Power Cables
Use this procedure to connect the SmartSlice I/O Terminal.
1. Connecting the Communications Cables
You connect the communications cable for the CompoNet network to the com-
munications connector on the CompoNet Communications Unit.
Note
Refer to
4-1 Connecting the Communications Cables
on page 30 for the con-
nection procedure.
2. Connecting the Unit Power Supply
Connect a 24-VDC power supply for the internal circuits of the CompoNet
Communications Unit and SmartSlice I/O Units to the Unit power supply ter-
minals on the CompoNet Communications Unit.
3. Connecting the I/O Power Supply
Connect a 24-VDC power supply for the outputs connected to SmartSlice
Output Units to the I/O power supply terminals on the CompoNet Communica-
tions Unit.
Note
Refer to
4-2 Connecting the Power Supply Cables
on page 31 for the connec-
tion procedure.
4. Connecting the External Devices
Connect the I/O signal lines from the external devices (in this example, the
switch and lamp) to the I/O terminals on the SmartSlice I/O Units.
Note
Refer to
4-5 Connecting the Signal Lines for External Devices
on page 38 for
the connection procedure.
7-3-3
Setting the SmartSlice I/O Terminals
Use this procedure to set the SmartSlice I/O Terminal.
1. Setting the Node Addresses
Set the rotary switches on the CompoNet Communications Unit to the node
address of the SmartSlice I/O Terminal on the CompoNet network.
Note
Refer to
5-1 Setting the Node Addresses
on page 40 for the setting proce-
dure.
• Do not set the same node address for more than one node.
• Turn OFF the Unit power supply before you change the node address setting.
Precaution for
Correct Usage
Содержание GRT1-CRT - 05-2008
