(5) Memory Cassette Slot
Mount a CP1W-ME05M Memory Cassette in this slot. G9SP
configuration data can be transferred to a Memory Cassette.
(6) Option Board Slot
The following Option Boards can be mounted:
• CP1W-CIF01 ver. 2.0 RS-232C Option Board
• CP1W-CIF41 Ethernet Option Board (unit version 2.0 or later)
(7) Expansion I/O Unit Connector
Up to two of the following CP-series Expansion I/O Units can be
connected:
• CP1W-20EDT/CP1W-20EDT1 20-point I/O Unit
• CP1W-32ET/CP1W-32ET1 32-point Output Unit
(8) I/O Indicators
Indicator
Color
Status
Meaning
OUT PWR Green
Lit
Output power (V2/G2) is ON.
OFF
Output power (V2/G2) is not ON, or an error is
blocking the power.
Si0 to Si19
So0 to 7
O0 to 3
Yellow
Lit
The I/O signal is ON.
Red Lit
• An error was detected in the I/O circuit.
• Discrepancy error occurred for a dual
channel setting.
Red Flashing
• An error was detected in the other channel
of a dual channel pair.
OFF
• The I/O signal is OFF.
• No error has been detected.
(9) Terminal Block
Connect the power supply and I/O devices to the terminal block.
3. DIMENSIONS
Model
A
B
G9SP-N10S 86
76
G9SP-N10D 130
120
G9SP-N20S
4. INTERNAL CIRCUITS AND WIRING
• G9SP-N10S
• G9SP-N10D
• G9SP-N20S
Terminals
Function
V1/G1
Power supply terminals for Internal/Input circuits (24 VDC).
V2/G2
Power supply terminals for output circuits (24 VDC).
NC
Not used (Do not connect)
Si0 to Si19
Safety input terminals
T0 to T5
Test output terminals
So0 to So15
Safety output terminals
O0 to O3
Standard output terminals
Internal Circuits and Wiring Example
I/O Wiring Example: Emergency Stop (Dual Channel) with Manual Reset
Related Manuals
Be sure you understand the information provided in all related manuals
before attempting to install or operate a G9SP-series Controller. Be sure
to read the precautions provided in the following manuals.
Manual name
Cat. No.
G9SP-series Safety Controller Operation Manual
Z922
G9SP-series Safety Controller Instruction Reference Manual
Z923
G9SP-series Safety Controller Host Connection Manual
Z924
SUITABILITY FOR USE
Omron Companies shall not be responsible for conformity with any
standards, codes or regulations which apply to the combination of the
Product in the Buyer's application or use of the Product. At Buyer's
request, Omron will provide applicable third party certification documents
identifying ratings and limitations of use which apply to the Product. This
information by itself is not sufficient for a complete determination of the
suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for
determining appropriateness of the particular Product with respect to
Buyer's application, product or system. Buyer shall take application
responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT
THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS
THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY
RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
OMRON Corporation
(Manufacturer)
Shiokoji Horikawa, Shimogyo-ku, Kyoto,
600-8530 Japan
Contact: www.ia.omron.com
Regional Headquarter
OMRON EUROPE B.V.
(Importer in EU)
Wegalaan 67-69, NL-2132 JD Hoofddorp
The Netherlands
Tel: (31)2356-81-300
Fax: (31)2356-81-388
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08
(Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011
Fax: (65) 6835-2711
OMRON SCIENTIFIC TECHNOLOGIES INC.
6550 Dumbarton Circle, Fremont
CA 94555 USA
Tel: (1) 510-608-3400
Fax: (1) 510-744-1442
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222
Fax: (86) 21-5037-2200
Note: Specifications subject to change without notice.
Printed in China
(Unit: mm)
8
A
B
90
100
110
Four, 4.5 dia.
81
85
