Omron FQ2-S/CH Series, Руководство пользователя

Страница: 370 / 590

Changing the Scene to Change the Line Process
368
FQ2-S/CH User’s Manual
Switching Scenes from an External Device
• Changing Scenes by Parallel Input Command
Vision Sensor FQ2-S/CH Series User's Manual for Communications Settings (Cat. No. Z338)
Section 2 Controlling Operation and Outputting Data with a Parallel Connection
• Changing Scenes by PLC Link Command
Vision Sensor FQ2-S/CH Series User's Manual for Communications Settings (Cat. No. Z338)
3-2 Controlling Operation and Outputting Data with PLC Link Communications
• Changing Scenes by EtherNet/IP Command
Vision Sensor FQ2-S/CH Series User's Manual for Communications Settings (Cat. No. Z338)
3-1 Controlling Operation and Outputting Data with EtherNet/IP Communications
• Changing Scenes by TCP No-protocol Command or a UDP No-protocol Command
Vision Sensor FQ2-S/CH Series User's Manual for Communications Settings (Cat. No. Z338)
3-4 Control and Output in No-protocol (TCP) / No-protocol (UDP)
• Changing Scenes by FINS/TCP No-protocol Command
Vision Sensor FQ2-S/CH Series User's Manual for Communications Settings (Cat. No. Z338)
3-5 Controlling Operation and Outputting Data with FINS/TCP No-protocol Commands
• Changing scenes by PROFINET command
Vision Sensor FQ2-S/CH Series User's Manual for Communications Settings (Cat. No. Z338)
3-3 Outputting Data and Controlling Operation through PROFINET
Setting the Startup Scene
(Setup Mode)
−
[Sensor settings]
−
[Startup settings]
The following items can be set.
Item Purpose Setting range
Startup mode
Select whether the startup scene
number is set manually.
ON
OFF
(The scene number when the settings were saved
will be the startup scene number. The startup mode
is set to OFF in the Default settings.)
Startup scene
Set the scene number to use at
startup. Standard models: 0 to 31
Single-function models: 0 to 8,
Default: 0