![background image](http://html1.mh-extra.com/html/omron/f3ss/f3ss_instruction-manual_1633198023.webp)
4 Installation
4-8 Physical Mounting
19
4-8-3 Bracket Mounting Points
The bracket included with the F3SS is designed to offer a wide range of mounting options and can be attached
either to the bottom of the emitter and receiver (allowing the widest range of adjustment) or directly to the back
cover of either unit.
Figure 4-15 Mounting Bracket
4-8-4 Alignment
Two aids have been provided on the F3SS to assist with long-range alignment.
A “gunsight” device has been designed into the top of the emitter and receiver housing to aid in physical align-
ment.
Additionally, the receiver has an amber-color visible alignment indicator which provides the following informa-
tional.
Note:
Where used with mirrors it is recommended to use the optional laser alignment tool, F39-LLK, to ease
alignment.
WARNING
Misalignment may increase reflective surface interference. Physical alignment of the emitter and receiver
should be performed carefully upon installation, and checked periodically thereafter.
Table 4-4 Alignment indicator light
If the amber light is:
This indicates:
Steady On
Strong Signal
Flashing
Weak Signal
Off
Out of Alignment or beam blocked
(When tightened,
mounting screws
prevent T-nuts from
sliding) Slots for T-nuts
BOTTOM VIEW
F1
F2
REAR VIEW
Mounting Screws (4)
See Above
Detail
T-Nut
Slides In Slot
T-Nut
Mounting Bracket
Washers
Mounting Screw
Gunsight
Содержание F3SS
Страница 4: ......