E3X-DAC-S
4
*1. Sensing Object: Standard Color Card (230 Colors) from Japan Color
Enterprise Co., Ltd.)
*2.
W
hen teaching with/without a workpiece, the best sensing method will be
automatically selected (RGB ratio (C Mode) or light intensity determination (I
Mode)). If color differences are not strong enough and RGB ratios would result
in unstable detection, then light intensity determination (I Mode) will be selected.
The detection mode can be set to C, I, or Black Mode.
*3. Input Specifications
Refer to the Instruction Manual for the external input pulse width.
A pulse width of 300 ms or longer is required to switch banks for the E3X-DAC
@
B-S.
*4. Mutual interference prevention cannot be used in super-high-speed mode,
and light intensity determination (I Mode) must be used. The response time
will be 150
μ
s if an A
N
D or OR is set for the control outputs.
*5.
W
ith light intensity determination (I Mode and Black Mode), the correlation is
not displayed, but rather the light intensity is displayed.
*6. The allowable ambient operating temperature changes according to the
number of Units that are linked.
2 Units:
−
25 to 55
°
C, 3 to 10 Units:
−
25 to 50
°
C, and
11 to 16 Units:
−
25 to 45
°
C
Amplifier Unit Connectors
Color (11 standard colors) Munsell color notation
White
N
9.5
Red
4R 4.5/12.0
Yellow/red
4YR 6.0/11.5
Yellow
5Y
8
.5/11.0
Yellow/green
3GY 6.5/10.0
Green
3G 6.5/9.0
Blue/green
5BG 4.5/10.0
Blue
3PB 5.0/10.0
Blue/purple
9PB 5.0/10.0
Purple
7P 5.0/10.0
Red/purple
6RP 4.5/12.5
(Black)
(
N
2.0)
Contact input
(relay or switch)
Non-contact input
(transistor)
NPN
O
N
: Shorted to 0
V
(sourcing current: 1 mA max.).
OFF: Open or shorted to
V
cc.
O
N
: 1.5
V
max.
(sourcing current: 1 mA max.)
OFF:
V
cc - 1.5
V
to
V
cc
(leakage current: 0.1 mA max.)
PNP
O
N
: Shorted to
V
cc
(sinking current: 3 mA max.).
OFF: Open or shorted to 0
V
.
O
N
:
V
cc - 1.5
V
to
V
cc
(sinking current: 3 mA max.)
OFF: 1.5
V
max.
(leakage current: 0.1 mA max.)
Item
Model
E3X-CN11
E3X-CN12
Rated current
2.5 A
Rated voltage
50
V
Contact resistance
20 m
Ω
max. (20 m
V
DC max., 100 mA max.)
(The figure is for connection to the Fiber Amplifier Unit and the adjacent Connector. It does not
include the conductor resistance of the cable.)
No. of insertions
Destruction: 50 times (The figure for the number of insertions is for connection to the Fiber Amplifier
Unit and the adjacent Connector.)
Materials
Housing
Polybutylene terephthalate (PBT)
Contacts
Phosphor bronze/gold-plated nickel
Weight (packed state)
Approx. 55 g
Approx. 25 g
Operating Procedures (Typical)
Detecting Marks
Disting
u
ishing Trays
Detecting Wafers
Beca
u
se it disting
u
ishes RGB
ratios, detection is highly resistant
to
w
orkpiece mo
v
ement.
Thro
u
gh-
b
eam heads are capa
b
le
of detecting color differences in
semi-transparent o
b
jects.
Fo
u
r-color determination greatly
red
u
ces the
w
ork re
qu
ired for
line s
w
itcho
v
ers.
Workpieces that a
b
sor
b
a specific
w
a
v
elength can
b
e detected
w
ith
a
w
ide range of
w
a
v
elengths.
Detecting Black Marks
Detecting Prod
u
cts on Con
v
eyors
In Black Mode,
b
lank seam tape and
other
b
lack marks can
b
e detected
regardless of film color or patterns
If yo
u
teach the con
v
eyor (i.e., the
b
ackgro
u
nd), yo
u
can detect
w
orkpieces e
v
en if they ha
v
e
different colors, shapes, or gloss.
Downloaded from
Downloaded from
Downloaded from
Downloaded from