4
Touch Switch
D5C
Dimensions
Note: 1.
All units are in millimeters unless otherwise indicated.
2.
Unless otherwise specified, a tolerance of
±
0.4 mm applies to all dimensions.
M18 x 1
4
4
14
37
28
56
61
(3,000)
(89)
M18 x 1
4
4
37
24
56
61
(3,000)
(85)
M18 x 1
4
4
14
51
37
56
101.5
61
(3,000)
(162.5)
D5C-1DS0
D5C-1DP0
D5C-1DA0
Two internal
lock washers
Lock nut
4 dia.
Two flat
washers
Self-locking
nut
M4 x 0.7
(see note 1)
(See note 2)
LED Operation
indicator
16.5 dia.
16.7 dia.
7.1
dia.
29 dia.
Two clamping nuts
(Width: 24; thickness: 4)
Caution label (see note 3)
Two internal lock washers
Overtravel
4 dia.
16.5
dia.
5
dia.
(See note 2)
LED Operation
indicator
(See note 1)
16.7 dia.
7.1
dia.
29 dia.
Two clamping nuts
(Width: 24; thickness: 4)
Caution label (see note 3)
LED Operation
indicator
Two clamping nuts
(Width: 24; thickness: 4)
Two internal lock washers
Overtravel
4 dia.
1.2 dia.
(see note 1)
(See note 2)
16.5 dia. 6.5
dia.
16.7 dia.
7.1
dia.
29 dia.
Caution label (see note 3)
DC Models
Coil Spring
Plunger
Free-attachment
Note:
1. The stainless steel wire actuator can move in any direction. However, limit the overtravel to within 20 mm from the free position. The force that
pushes the actuator must not exceed 1.96 N.
2. Vinyl insulated round cord (oil- and shock-resistant type)
4 dia., three cores
×
0.2 mm
2
.
3. Use after removing the caution label.
Note:
1. The overtravel of the stainless steel plunger is within 3.5 mm. Do not apply a force greater than 9.8 N to the plunger.
2. Vinyl insulated round cord (oil- and shock-resistant type)
4 dia., three cores
×
0.2 mm
2
.
3. Use after removing the caution label.
Note:
1. Limit the total length of actuator wire to 1 m or less. When mounting the Switch to a metal plate, do not exceed an area of 200 cm
2
.
2. Vinyl insulated round cord (oil- and shock-resistant type)
4 dia., three cores y 0.2 mm
2
.
3. Use after removing the caution label.
