6
From the
File
menu, select
New
‒
Project
.
7
Input a project name and save destina-
tion, and select the
OK
button.
3-2-2
Controller Initial Setting
Follow the procedure below to perform the initial settings for the Controller.
Precautions for Correct Use
Since all memory is cleared by the initial settings, be sure to save any data remaining in the
Controller that you may need.
1
Type the
$$$***
command from the Ter-
minal, and set the Controller to the fac-
tory default state.
3 Sinusoidal Encoder Connection Procedure
3-4
CK3M-series Startup Guide Sinusoidal Encoder (O048)
