Omron C200HS Series, Руководство по замене, Страница: 33 / 36

24
< Transistor Output Units >
C200H-series Unit Corresponding CS-series Unit Description Difference
C200H-OD219 CS1W-OD261 Transistor Output Unit with
connector for 64 outputs.. 1) No. of circuits (32 points/common x 2 circuits
→
16 points/common x 4 circuits)
2) Output circuit specifications
Output voltage range
(5 to 24 VDC
→
12 to 24 VDC)
Residual voltage (0.8 V
→
1.5 V)
ON response time (0.1 ms
→
0.5 ms)
OFF response time (0.4 ms
→
1.0 ms)
3) Internal current consumption
(5 VDC: 270 mA
→
390 mA)
4.5 to 26.3 VDC, 0.1 A, Sinking,
Connector, 64 outputs
(Group-2) 12 to 24 VDC, 0.3 A, Sinking,
Connector, 64 outputs
< TTL Output Unit >
C200H-series Unit Corresponding CS-series Unit Description Difference
C200H-OD501
No replacement model
TTL Output Unit with connector for 32 outputs. The CS Series does not have the
same type of Unit.
Use C200H-OD501 with CS1 or use the CS1W-OD231 Transistor Output Unit or
CS1W-MD561 TTL I/O Unit instead.
5 VDC, 35 mA, Connector,
32 outputs (Special I/O)
< Triac Output Units >
C200H-series Unit Corresponding CS-series Unit Description Difference
C200H-OA223 CS1W-OA201 Triac Output Unit with
terminal block for 8 outputs. 1) Terminal block
2) Output circuit specification
Max. inrush current (15 A: Pulse width 100 ms,
30 A: Pulse width 10 ms
→
10 A: Pulse width
100 ms, 20 A: Pulse width 10 ms)
3) Internal current consumption
(5 VDC: 180 mA
→
230 mA)
250 VAC, 1.2 A, Terminal block,
8 outputs 250 VAC, 1.2 A, Terminal block,
8 outputs
C200H-OA221 CS1W-OA201 Triac Output Unit with
terminal block for 8 outputs. 1) Terminal block
2) Output circuit specifications
Max. inrush current (No regulation
→
10 A:
Pulse width 100 ms, 20 A: Pulse width 10 ms)
Residual voltage (1.2 VAC
→
50 to 1200 mA: 1.5 VAC, 10 to 50 mA: 5 VAC)
OFF response time (1/2 of load frequency or
less
→
1/2 of load fre 1 ms or less)
3) Internal current consumption
(5 VDC: 140 mA
→
230 mA)
250 VAC, 1.2 A, Terminal block,
8 outputs 250 VAC, 1.2 A, Terminal block,
8 outputs
C200H-OA224 CS1W-OA211 Triac Output Unit with
terminal block for 12 outputs.
Replace this unit with a Triac
Output Unit with 16 outputs. 1) Terminal block
2) Output points (12 points
→
16 points)
3) No. of circuits (12 points/common x 1 circuit
→
8 points/common x 2 circuits)
4) Output circuit specifications
Max. switching capacity
(250 VAC 0.5 A/point, 2 A/Unit
→
0.5 A/point, 2 A/common, 4 A/Unit)
Max. inrush current
(10A: Pulse width 100 ms, 20A: Pulse width
10 ms
→
15A: Pulse width 10 ms)
Min. switching capacity
(10 VAC: 100 mA, 24 VAC: 50 mA, 100 VAC:
10 mA
→
75 VAC: 50 mA)
Residual voltage (50 to 500 mA: 1.5 VAC,
10 to 50 mA: 5 VAC
→
1.6 VAC
5) Internal current consumption
(5 VDC: 270 mA
→
406 mA)
250 VAC, 0.5 A, Terminal block,
12 outputs 250 VAC, 0.5 A, Terminal block,
16 outputs
C200H-OA222V CS1W-OA211 Triac Output Unit with
terminal block for 12 outputs.
Replace this unit with a Triac
Output Unit with 16 outputs. 1) Terminal block
2) Output points (12 points
→
16 points)
3) No. of circuits (12 points/common x 1 circuit
→
8 points/common x 2 circuits)
4) Output circuit specifications
Max. inrush current
(No regulation
→
15 A: Pulse width 10 ms)
Min. switching capacity (10 VAC: 10 mA
(resistive load)/40 mA (inductive load)
→
75 VAC: 50 mA)
Residual voltage (1.2 VAC
→
1.6 VAC)
ON response time
(1/2 of load frequency or less
→
1 ms or less)
OFF response time (1/2 of load frequency or
less
→
1/2 of load fre 1 ms or less)
5) Internal current consumption
(5 VDC: 200 mA
→
406 mA)
250 VAC, 0.3 A, Terminal block,
12 outputs (CE marked) 250 VAC, 0.5 A, Terminal block,
16 outputs