Omron BP769CAN, Инструкция по эксплуатации

Страница: 19 / 54

15
2. Preparation
EN
2.3
Setting the Date and Time
The date and time are automatically set when you pair with your smart device. To set
manually, follow the instructions below. For pairing instructions, refer to section 4.1.
1.
Press the connection button .
1
If your monitor has not been paired with a smart
device, the year flashes on the date and time
display.
2
If your monitor has been paired with a smart
device already, the connection symbol “
” and
“ ” flashes on the display of the monitor. Then
press the button again, and the year flashes
on the date and time display.
NOTE:
When the connection symbol “ ” and “ ” flashes on the display of your monitor, you can
transfer your readings. Refer to section 4.2.
Open the rear cover page to read the following:
The letter identifiers on the rear cover page correspond to those in the body of this page.
C