Omron A165S -, Техническое описание

Страница: 8 / 16

G-66
Knob-type Selector Switch
A165S/W
Specifications
■
Approved Standards
Note: cUL: CSA, C22.2 No. 14
■
Approved Standard Ratings
UL, cUL (File No. E41515)
5 A at 125 VAC, 3 A at 250 VAC (general use)
3 A at 30 VDC (resistive)
EN60947-5-1 (Low Voltage Directive)
3 A at 250 VAC (AC12), 3 A at 30 VDC (DC12)
■
Ratings
Contacts
Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted under the following
conditions.
1. Load: Resistive load
2. Mounting conditions: No vibration and no shock
3. Temperature: 20
±
2
°
C
4. Operating frequency: 20 times/min
Super-bright LED
Note: The values in parentheses are for blue Selectors.
■
Characteristics
Note: 1. Set and reset constitute one operation.
2. With LED and incandescent lamp not mounted.
Agency Standards File No.
UL, cUL (See note.) UL508 E41515
--- EN60947-5-1 ---
AC resistive load DC resistive load
3 A at 250 VAC
5 A at 125 VAC 3 A at 30 VDC
Rated
voltage
Rated current Operating
voltage
Internal limiting
resistor
5 VDC 30 mA (15 mA) 5 VDC
±
5% 33
Ω
(68
Ω
)
12 VDC 15 mA 12 VDC
±
5% 270
Ω
(560
Ω
)
24 VDC 10 mA 24 VDC
±
5% 1600
Ω
(2,000
Ω
)
Item Knob-type Selector Switch
Allowable operating
frequency Mechanical 20 operations/minute max.
Electrical 10 operations/minute max.
Insulation resistance 100 M
Ω
min. (at 500 VDC)
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between terminals of same polarity
2,000 VAC, 50/60 Hz for 1 min between terminals of different polarity and also between each ter-
minal and ground
1,000 VAC, 50/60 Hz for 1 min between lamp terminals (see note 2)
Vibration resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms)
Shock resistance Mechanical
500 m/s
2
Malfunction
150 m/s
2
max. (malfunction within 1 ms)
Durability Mechanical 250,000 operations min.
Electrical 100,000 operations min.
Ambient temperature Operating:
−
10
°
C to 55
°
C (with no icing or condensation)
Storage:
−
25
°
C to 65
°
C (with no icing or condensation)
Ambient humidity Operating: 35% to 85%
Electric shock protection class Class II
PTI (tracking characteristic) 175
Degree of contamination 3 (IEC947-5-1)
Weight Approx. 13 g (in the case of a lighted DPDT switch)