Knob-type Selector Switch
A165S/W
G-73
Push
bu
tto
n
Switch
es
Models with PCB Terminals
Installation
For details on mounting the Switch to a panel, and mounting and dismounting the Switch, refer to installation details for the A16 Pushbutton Switch.
■
Panel Mounting
Refer to the
Installation
section for the A16.
■
Mounting and Replacing the
Pushbutton
Refer to the
Installation
section for the A16.
■
Flange Rotation
A165 Knob-type Selector Switch
Fix the Switch screw and rotate the flange in 45
°
turns.
Precautions
Refer to the
Technical Information for Pushbutton Switches
(Cat. No. A143) and the
Precautions
section for the A16.
(Top View)
(Top View)
24 min.
24 min.
16
+0.2
dia.
0
24 min.
25 min.
Recommended panel thickness: 0.5 to 3.2 mm
25 min.
Recommended panel thickness: 0.5 to 3.2 mm
Rectangular
A165
@
-J
Square A165
@
-A
Round A165
@
-T
Rectangular
A165W
@
-T
Rectangular
A165
@
-2S
16
+0.2
dia.
0
16
+0.2
dia.
0
33 min.
(Dimension A)
16
+0.2
dia.
0
23 min.
(Dimension A)
Note: 1.
Ensure that the variation in the distance between the centers of neighboring mounting holes is less than
±
0.1 mm.
3.
If the panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after coating.
2.
Make sure the thickness of the mounting panel is 0.5 to 3.2 mm. If, however, a Switch Guard or Dust Cover is used, the
thickness of the mounting panel must be 0.5 to 2 mm.
24 min.
Flange
Lock ring
Switch screw
