G-18
Pushbutton Switch
A16
Specifications
■
Approved Standards
Note:
cUL: CSA, C22.2 No. 14
■
Approved Standard Ratings
UL, cUL (File No. E41515)
5 A at 125 VAC, 3 A at 250 VAC (general use)
3 A at 30 VDC (resistive)
EN60947-5-1 (Low Voltage Directive)
3 A at 250 VAC (AC12), 3 A at 30 VDC (DC12)
■
Ratings
Contacts
Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted under the following
conditions.
1.
Load: Resistive load
2.
Mounting conditions: No vibration and no shock
3.
Temperature: 20
±
2
°
C
4.
Operating frequency: 20 operations/min
Super-bright LED
Note:
The values in parentheses are for models with blue Pushbut-
tons.
Incandescent Lamp
■
Characteristics
Note: 1.
Set and reset constitute one operation.
2.
With LED and incandescent lamp not mounted.
Agency
Standards
File No.
UL, cUL (See note.)
UL508
E41515
---
EN60947-5-1
---
AC resistive load
DC resistive load
3 A at 250 VAC
5 A at 125 VAC
3 A at 30 VDC
Rated
voltage
Rated current
Operating
voltage
Internal limiting
resistor
5 VDC
30 mA (15 mA)
5 VDC
±
5%
33
Ω
(68
Ω
)
12 VDC
15 mA
12 VDC
±
5%
270
Ω
(560
Ω
)
24 VDC
10 mA
24 VDC
±
5%
1600
Ω
(2,000
Ω
)
Rated voltage
Rated current
Operating voltage
6 VAC/VDC
60 mA
5 VAC/VDC
14 VAC/VDC
40 mA
12 VAC/VDC
28 VAC/VDC
24 mA
24 VAC/VDC
Item
Pushbutton Switch
Allowable operating fre-
quency
Mechanical
Momentary operation:
120 operations/minute max. (See note 1.)
Alternate operation:
60 operations/minute max. (See note 1.)
Electrical
20 operations/minute max. (See note 1.)
Insulation resistance
100 M
Ω
min. (at 500 VDC)
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min between terminals of same polarity
2,000 VAC, 50/60 Hz for 1 min between terminals of different polarity and also between each terminal and ground
1,000 VAC, 50/60 Hz for 1 min between lamp terminals (See note 2.)
Vibration resistance
Malfunction
10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms)
Shock resistance
Mechanical
500 m/s
2
Malfunction
150 m/s
2
max. (malfunction within 1 ms)
Durability
Mechanical
Momentary operation:
2,000,000 operations min.
Alternate operation:
200,000 operations min. (See note 1.)
Electrical
100,000 operations min. (See note 1.)
Ambient temperature
Operating:
–10
°
C to 55
°
C (with no icing or condensation)
Storage:
–25
°
C to 65
°
C (with no icing or condensation)
Ambient humidity
Operating:
35% to 85%
Electric shock protection class
Class II
PTI (tracking characteristic)
175
Degree of contamination
3 (IEC947-5-1)
Weight
Approx. 10 g (in the case of a lighted DPDT switch with solder terminals)