Timing Charts
57
ZG2-DSU User’s Manual
5
COMMUN
ICATION WITH
EXTE
R
NAL
DEVICES
Measurement cycle
Transferring Bank Data
Alarm Output
When the Data Storage Unit is connected, the measurement cycle of the Sensor Controllers
increases according to the display mode of the Sensor Controller.
• Profile display: approx. 150 to 300 ms (varies according to profile shape)
• Digital display: approx. 50 ms per displayed task (i.e. approx. 200 ms when four tasks are
displayed)
To set the fastest measurement cycle, use the Sensor Controllers with the display OFF (ECO
monitor).
Process
Description
(1) Transfer of bank data Bank data is transferred between the Sensor Controller and Data
Storage Unit. Transfer operation is performed by using serial
communication commands or menu operations.
(2) Process executing
During transfer of bank data, the BUSY signal is turned ON. New
operation instructions cannot be accepted while the BUSY signal is
ON.
Process
Description
T1: Alarm output delay
time
This is the delay time from when the measurement value is applied
on the Sensor Controller up to output of the alarm on the Data
Storage Unit.
1 ms or less
N
ot
e
BUSY signal
OFF
ON
(1) Transfer of bank data
(2) Process executing
Sensor Controller
judgment output
Data Storage Unit
alarm output
ON
OFF
ON
OFF
T1
Содержание 257553
