2005 Omnitronix, Inc.
5
Accessing the command line
1. On the computer open the terminal emulation program to whatever comm port is
connected to the DL30 at baud rate and parity setting of 19200, 8N1.
2. Press <enter> three times. The “Data-Link” banner will appear.
3. Type STATUS <enter> (or the “?”).
Note:
Commands entered into the DL30 are
not
case sensitive.
You should be presented with the Status screen, which looks similar to the following:
Data-Link DL30 1.00 STD Unit Serial # 1030331E
ID : Data-Link I/O1 Baud Rate : 19200
Date : TUE 08/01/05 I/O1 Parity, etc. : 8N1
Time : 12:08:15 I/O2 Baud Rate : 19200
Memory : 256K I/O2 Parity, etc. : 8N1
% Full : 0% File Records : 0
Modem : NO File Bytes : 0
Network : YES Handshake : NONE
IP Add : 192.168.100.19 File Wrap : OFF
MAC Add : 00:10:A3:30:33:1D Alarm Filter : ON
COMPLETE
You are now successfully connected to the DL30 command processor.
