2005 Omnitronix, Inc.
4
Quickstart Guide
Hardware Checklist
●
Omnitronix Data-Link DL30
●
Computer with male DB9 RS-232 serial port and terminal emulation software
●
DB9 serial cable (included)
●
Power adaptor (included)
●
Ethernet network access (optional)
●
POTS (analog) phone line (optional)
Data Checklist
If your DL30 comes with optional Ethernet port you will need:
●
Static IP address to assign to the DL30
●
Subnet mask
●
Default router (gateway) IP address
Connecting
Cables and power
1. Connect one end of the DB9 cable to Output port of the DL30 and the other
end into a serial comm port of the computer with terminal emulation software.
2. Connect the power supply cord into the DL30 and the transformer into an
appropriate power receptacle.
3. If installed with Ethernet port, connect a network Ethernet cable into this port.
4. If installed with an internal modem, connect a POTS (analog) phone line into the
RJ-11 modem jack.
Power up sequence
On power up the DL30 the internal buzzer beeps three times. When the Reset button is
pressed and released the DL30 beeps twice. The Power LED remains on steady and the
25% LED flashes on and off about once per second when boot up is complete.
