Omnitronic WAMS-08BT MK2, Руководство пользователя

Страница: 23 / 32

23
•
EN
5 Audio player MP3 player with built-in Bluetooth receiver and 5 operating buttons.
[MODE]: For switching between USB, SD and Bluetooth operation.
[
/VOL-] / [ /VOL+]: Short actuation: for title or folder selection. / Long
actuation: for volume adjustment.
[REPEAT]: for selecting random play and repeat functions.
[►
II /FOLDER]: Short actuation: for switching between play and pause. /
Long actuation: for switching over to folder selection mode.
6 USB port Use this input to connect the optional USB dongle UWM-2HH for wireless
microphone operation. Alternatively, you can charge the batteries of
mobile devices up to max. 5V/1 A.
7 Reception indicator Lights when an audio signal from wireless microphone 1 is received.
8 Reception indicator Lights when an audio signal from wireless microphone 2 is received.
9 Level control To mix the signal of the wireless microphone 1 to the master signal.
10 Level control To mix the signal of the wireless microphone 2 to the master signal.
11 Mono inputs Channel 1 and 2 provide balanced mono inputs with combo connectors.
Use standard XLR or 6.3 mm cables to connect dynamic microphones to
these inputs. These inputs also accept high-impedance music
instruments such as electric guitars or electric bass guitars. Then adjust
the input level with the corresponding Hi-Z button.
12 Hi-Z level switch Press this button to switch channel 1 or 2 to high-impedance instrument
level. When the button is released the corresponding input is switched to
microphone level.
13 Level controls To mix the microphone signal of channel 1 and 2 to the master signal.
14 Stereo input Unblanced stereo RCA input for channel 3. Use a standard stereo RCA
cable to connect a line-level device (e.g. CD player) to this input.
15 AUX input 3.5 mm jack for connecting portable audio units with line level (e.g. MP3
player) to channel 3.
16 Level control This control determines the level of channel 3 and the audio player.
Therefore, do use the inputs in channel 3 during audio player operation.
Otherwise, both audio sources will be reproduced at the same time.
17 Tone controls 2-band tone control for the master signal (BASS = low frequencies,
TREBLE = high frequencies).
18 Effect control Adjusts the intensity of the internal reverb effect for the microphone
inputs of channel 1 and 2.
19 Master control Adjusts the overall volume.
20 Charging indicator This indicator lights red when the battery is being charged. It lights green
when the battery is fully charged and during mains operation.
21 Clip indicator The PEAK LED lights if the internal power amplifier section is
overloaded. Reduce the volume of the signal sources accordingly.
22 Power indicator This indicator lights green when the PA system is powered on. If it lights
red, the battery should be charged soon.
23 Power on/off Switches the PA system on/off.
24 Power input Used to plug in the supplied power cord.
25 Fuse holder Only replace the fuse when the device is disconnected from mains. Only
use fuses of the same rating and power.