www.omnitronic.com
00052389.DOC, Version 1.0
Universal Dynamic Microphone
Safety Instructions
Setting into Operation
Cleaning
Technical Specifications
The OMNITRONIC
is a dynamic microphone with cardioid characteristic
designed for stage and studio applications and is ideally suited for speech and vocals. The
microphone is supplied with an XLR/jack cable, a stand holder and a plastic case.
Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used
for other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
Protect the microphone against humidity and heat. The ambient temperature must always be
between -5° C and +45° C.
Screw the holder onto a stand with 1.5 cm thread. For stands with 1 cm thread use the supplied
adapter screw. Insert the microphone into the holder from above. Connect the microphone via the
supplied cable to the XLR microphone input of your audio unit (e.g. mixing console). The microphone
and the cable are balanced, the 6.3 mm jack is unbalanced. To switch on the microphone, set the
sliding switch to the lower position.
For cleaning the microphone only use a dry cloth. Never use chemicals or water.
Type:............................Dynamic
Directivity pattern: ........Cardioid
Frequency range:.........100 Hz - 14 kHz
Impedance:..................600
Sensitivity: ...................-73 dB
Connector:...................3-pin XLR, bal.
Cable: ..........................3-pin XLR, bal./6.3 mm jack, unbal.
Weight: ........................800 g
VM-230 S PRO
W
Please note: Every information is subject to change without prior notice. 10.07.2009 ©
VOCAL MICROPHONE
USER MANUAL
VM-230 S PRO
