8
SAFETY INSTRUCTIONS
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems.
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Please make sure that there are no obvious transport damages. Should you notice any damages on the
power unit or on the casing, do not take the device into operation and immediately consult your local dealer.
The device falls under protection class III. The device always has to be operated with an appropriate power
unit. Always plug in the power unit last. The power plug must always be inserted without force. Make sure
that the plug is tightly connected with the outlet.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off
until it has reached room temperature.
We recommend a frequent cleaning of the device. Please use a moist, lintfree cloth. Never use alcohol or
solvents. Disconnect from mains before starting maintenance operation!
There are no serviceable parts inside the device. Should you have further questions, please contact your
dealer.
..............................................................................................................................................................................
OPERATING DETERMINATIONS
The rotary mixer
features two stereo input channels with 2-band EQ for line and phono signal sources. It has
been specially designed for DJs. The built-in 3-band frequency isolators allow completely removing low, mid
and high frequencies for amazing mixing.
This product is only allowed to be operated with the voltage given on the type plate and and was designed
for indoor use only.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters. The relative humidity must not exceed 100 % with an ambient temperature
of 25° C. This device must only be operated in an altitude between -20 and 2000 m over NN.
Avoid brute for during installation. There should not be any cables lying around. You endanger your own and
the safety of others!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons! If this
device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock etc.
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires!
