00053491.DOC, Version 1.0
41/46
7.4 Prefader listening to the channels
When the computer’s sound card has been configured for prefader listening (
s. section 6.1 Configuration
of the controller) you can monitor each of the decks via headphones even if the corresponding channel is
faded out. Thus, it is possible, e. g. to play the beginning of a title, to set a cue point, or to adjust a
continuous loop without the audience listening in. Use the buttons PFL to the select the channel to be
monitored and adjust the desired headphone volume with the software's control CUE.
7.5 Crossfading between the decks
1. The crossfader allows crossfading between both decks:
• crossfader moved to the left: fade-in of Deck A and fade-out of Deck B
• crossfader moved to the right: fade-in of Deck B and fade-out of Deck A
• for hearing the signals of the two decks at the same level, set the crossfader to mid-position
2. The characteristic of the crossfader can be adjusted with the control X-FADER CURVE:
• left position: smooth crossfading (gradual transition ) e.g. for long mixes
• right position: sharp crossfading (abrupt transition) e.g. for scratching and cutting.
CAUTION!
Do not use the control X-FADER CURVE while a signal is present as this may cause a sudden change
in volume.
7.6 Fast forward and reverse
For fast forward and reverse first activate the search function for the jogdial by shortly pressing the button
SEARCH (orange LED lights up). Then turn the jogdial in the corresponding direction.
In order to quickly jump to a certain spot in the title, click on the corresponding position in the signal diagram
or in the position ring around the turntable platter.
7.7 Return to the starting point of the title or to a defined spot (cueing)
To quickly jump to a defined spot, three starting points (cue points) can be stored permanently for the
buttons HOT CUE 1 to 3. The cue points well be kept even after closing the program and can be overwritten
at any time. With the button CUE you can return to the beginning of the title or a cue point defined before,
and momentarily play the title.
Button CUE
1. To jump to the starting point of a title, press the button CUE in pause or play mode. Now the unit is in
pause mode at the starting point of the title (LED of the button CUE lights up red).
2. After jumping to the cue point, playback can be started with the button . Alternatively, you can keep
the button CUE pressed and momentarily play the title. As soon as you release the button the unit
instantly returns to the cue point and is in pause mode.
3. If cue points have been stored with the buttons HOT CUE 1 to 3, pressing the button CUE will not return
you to the starting point of a title but to the cue point stored last.
Buttons HOT CUE 1 to 3
1. To set a cue point while playing a title, either press one of the buttons HOT CUE 1 to 3 when the desired
spot is reached (fly cue) or set the unit to pause at the desired spot with the button precisely select
the desired spot with the jogdial, and then press one of the buttons HOT CUE 1 to 3.
2. It is now possible to jump to the corresponding cue points with the buttons HOT CUE 1 to 3. The title is
played from the cue point.
3. Pressing the buttons HOT CUE 1 to 3 several times will restart the title from the cue point, creating a
stutter effect.
4. To overwrite a cue point, first press the button CUE and then press the desired button HOT CUE 1 to 3.
Содержание TMC-01
Страница 2: ...00053491 DOC Version 1 0 2 46 ...
