18
•
EN
POWER
SIGNAL
LIMIT
MONITOR
DJ
FLAT
OFF
90Hz
120Hz
ON
OFF
DSP PRESET
LOW CUT
LINE
MIC
LEVEL
MIN
MAX
LINK
AC INPUT
190-250
50Hz / 300W
~
CONTROL
T2A/250V
CAUTION:
TO PREVENT ELECTRIC SHOCK
DO NOT OPEN. NO USER SERVICEABLE
PARTS INSIDE.
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
INPUT
3
Operating Elements and Connections
Model PAS 208A | 210A
No.
Function
1
Status indicators
POWER: speaker is powered on
SIGNAL: input signal is present
LIMIT: the signal level is too high; the limiter
will reduce the signal level to protect the
speakers. Reduce the volume with the
master control until the LED does not light
anymore, or only at signal peaks.
2
LOW CUT switch
To enable a high pass filter. This allows
low-frequency signal components below 90
Hz or 120 Hz (e.g. impact sound) to be
suppressed.
3
DSP PRESET switch
To select various equalizer presets: FLAT =
neutral frequency response
, DJ = low and
high frequency boost, MONITOR = low and
high frequency cut, mid boost.
4
Input selector switch LINE/MIC
Switches the signal input between line and
microphone input.
• switch disengaged = microphone input
• switch engaged = line input
5
Level control
For adjusting the overall level.
6
Feed-through output LINK
Balanced XLR jack, connected in parallel to
the input, to connect another device, e.g. a
further active speaker system.
7
Mic/line input
Combo input (XLR/6.3 mm jack) for
connecting microphones or audio units with
line level output (e.g. mixer, CD player,
music instrument).
8
Power switch
Turns power to the speaker system on and
off.
9
Power input with fuse holder
Used to plug in the supplied power cord.
Only replace the fuse when the device is
disconnected from mains. Only use fuses of
the same rating and power. The correct
fuse value is specified on the rear panel.
Содержание PAS 151A
Страница 1: ...1 DE...
