Omnitronic MPZ SERIES Скачать руководство пользователя страница 18

 

 

 

 

 

18

 

Unpacking

 

Please make sure that there are no obvious transport 
damages. Should you notice any damages on the 
connection panel or on the casing, do not take the 
speaker system into operation and immediately consult 
your local dealer. 

Protection Class 

This device falls under protection class I. The power 
plug must only be plugged into a protection class I 
outlet. The voltage and frequency must exactly be the 
same as stated on the device. Wrong voltages or power 
outlets can lead to the destruction of the device and to 
mortal electrical shock.  

Power Cord 

Always plug in the power plug least. The power plug 
must always be inserted without force. Make sure that 
the plug is tightly connected with the outlet. Never let 
the power cord come into contact with other cables! 
Handle the power cord and all connections with the 
mains with particular caution! Never touch them with 
wet hands, as this could lead to mortal electrical shock. 
Never modify, bend, strain mechanically, put pressure 
on, pull or heat up the power cord. Never operate next 
to sources of heat or cold. Disregard can lead to power 
cord damages, fire or mortal electrical shock. The cable 
insert or the female part in the device must never be 
strained. There must always be sufficient cable to the 
device. Otherwise, the cable may be damaged which 
may lead to mortal damage. Make sure that the power 
cord is never crimped or damaged by sharp edges. 
Check the device and the power cord from time to time. 
If extension cords are used, make sure that the core 
diameter is sufficient for the required power 
consumption of the device. All warnings concerning the 
power cords are also valid for possible extension cords. 
Always disconnect from the mains, when the device is 
not in use or before cleaning it. Only handle the power 
cord by the plug. Never pull out the plug by tugging the 
power cord. Otherwise, the cable or plug can be 
damaged leading to mortal electrical shock. If the power 
plug or the power switch is not accessible, the device 
must be disconnected via the mains. 
If the power plug or the device is dusty, the device must 
be taken out of operation, disconnected and then be 
cleaned with a dry cloth. Dust can reduce the insulation 
which may lead to mortal electrical shock. More severe 
dirt in and at the device should only be removed by a 
specialist. 

Liquids 

There must never enter any liquid into power outlets, 
extension cords or any holes in the housing of the 
device. If you suppose that also a minimal amount of 
liquid may have entered the device, it must immediately 
be disconnected. This is also valid, if the device was 
exposed to high humidity. Also if the device is still 
running, the device must be checked by a specialist if 
the liquid has reduced any insulation. Reduced 
insulation can cause mortal electrical shock. 

Foreign Objects 

There must never be any objects entering into the 
device. This is especially valid for metal parts. If any 
metal parts like staples or coarse metal chips enter into 
the device, the device must be taken out of operation 
and disconnected immediately. Malfunction or short-
circuits caused by metal parts may cause mortal 
injuries. 

Avoiding Hum 

Never install the amplifier next to highly sensitive 
devices like pre-amplifiers or tape decks, as the strong 
magnetic field of the amplifier can produce hum in these 
devices. The magnetic field is strongest directly above 
or below the amplifier. If a rack is used, the amplifier 
should be installed at the bottom and the highly 
sensitive devices at the top. 

Prior to Switching on 

Before the unit is switched on all faders and volume 
controls have to be set to zero or minimum position. 
Turn the amplifier on last and off first! Only connect the 
device when the power switch is off. Never connect 
output to output. Never connect the inputs or outputs to 
any power source (batteries, etc.) 

Children and Amateurs 

Keep away children and amateurs!  

Maintenance and Service 

There are no serviceable parts inside the speaker 
system. Maintenance and service operations are only to 
be carried out by authorized dealers! 

Batteries  

Batteries are hazardous waste which need to be 
disposed of appropriately. If the device is to be 
disposed, the batteries have to be removed first.  
Make sure that the poles are correct when inserting the 
battery.  
Never let batteries lying around openly as there is the 
danger that these can be swallowed by children or 
domestic animals. Immediately consult a doctor when 
batteries are swallowed!  
Leaking or damaged batteries can cause irritations 
when getting into contact with the skin. In this case use 
appropriate protective gloves.  
Make sure that the batteries cannot be short-circuited, 
thrown into the fire and be charged. There is a danger 
of explosion.  
 

 

Содержание MPZ SERIES

































Отзывы: