10355025_V_1_0.DOC
11/11
• On the opposite side there are stereo headphone outputs to connect your stereo headphones.
Stereo 1/4“ jack-plug:
Tip
Right
Left
Ground
Ring Sleeve
• Via the HP-LEVEL-control you can adjust the volume of the headphones.
• You can control the volume of each channel by using the LEVEL-controls CH-1, CH-2 and CH-3.
• Adjust the volume of the master-ouput via the MASTER-control.
• With the BALANCE-controls you are able to change the left and right signals of the 3 channels.
• Connect the connection cable of the power-unit with the DC IN-socket. Plug the power unit into your outlet
(Power-LED on).
CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
12 V DC, 150 mA
Input impedance:
10 kOhm
Output impedance:
100 Ohm
Max. input level:
-30 dB
Max. output level:
+13 dB
Frequency range:
20 Hz - 20 kHz, + 1 dB
Gain:
27 dB
T.H.D.:
0.005 %
Dimensions:
143 x 93 x 45 mm
Weight:
590 g
Please note: Every information is subject to change without prior notice. 03.06.2004 ©
