00061296.DOC, Version 1.1
28/31
5.6 Suspended installation
This speaker system must never be suspended - Danger to Life due to crashing
speaker systems!
5.7 Use as floor monitor
Attach the included brackets at the rear end of the box.
Not for model [
KB-208A
].
6. CONNECTIONS
All connections have to be made or changed only if the speaker system is switched off!
6.1 Connecting audio devices
1. Connect the signal source optionally via an XLR plug or a RCA cable to the input [
LINE IN
]. It is possible
to connect the line output of e.g. a mixer or CD player.
2. Connect a microphone optionally via an XLR or 6.3 mm plug to the respective microphone input [
MIC
IN
]. The XLR and 6.3 mm jacks are balanced, but they can also be connected unbalanced.
Model [
KB-208A
] only features an XLR input.
3. The line input signal fed-through is available at the jack [
LINE OUT
]. This output allows to connect the
line input of e.g. another active speaker system optionally via an XLR or 6.3 mm plug.
Model [
KB-208A
] does not have an XLR output.
Pin connection of the XLR connectors:
2
1
3
1
2
3
Balanced use with XLR connectors
1 = Ground / Shield
2 = Hot (+)
3 = Cold (-)
For unbalanced use pin 1 and pin 3 have to be bridged
Input
Output
