16
(8) MIC LEVEL-CONTROL
With the MIC LEVEL control, you can adjust the microphone volume.
(9) TALKOVER-BUTTON
Press this button if you want to use your microphone. When the button is pressed, all signals but the
microphone level are attenuated by 14 dB. In the OFF-position, all signals return to their original level.
(10) MASTER-CONTROL
Adjusts the level of the master output.
(11) CUE LEVEL-CONTROL
With the CUE LEVEL control, you can adjust the phones volume without changing the output signal.
(12) CUE MIXING-FADER
Selects the channel for monitoring. The monitor signal comes from Prefader. This means it will not be
affected by the channel faders.
Connect your headphones to the HEADPHONES jack. With the CUE MIXING-fader you can select the
desired channel.
(13) CUE SPLIT/CUE MIX-BUTTON
Cue Split-function (button released): the Cue-signal is on the one side of the headphones and the output-
signal (CH-2) on the other side.
Cue Mix-function (button pressed): the adjustable mix of Cue-signal and output-signal is on both sides of the
headphones.
(14) HEADPHONES-JACK
Use this jack to connect the headphones. Headphones from 8 Ohms to 600 Ohms can be used. 8 Ohms is
recommended.
6. IN- AND OUTPUTS:
*1'
201,7521,& 6+2:(48,30(17 *PE+ *(50$1<
7\S7\SH
6SDQQXQJV
YHUVRUJXQJ
3RZHU VXSSO\
$
*HVDPW
DQVFKOXVVZHUW
3RZHU FRQVXPSWLRQ
201,7521,& );
& 9 $
9$
0,&
(15) GND (Ground terminal)
Connect the ground lead of the turntable with this terminal. This helps to reduce humming and pop noises.
(16), (17) LINE / PHONO INPUT JACKS
Input jack for CH-1 and CH-2. Connect turntables equipped with MM pickup cartridge to PHONO input. CD
players or Tape Decks should be connected to LINE input. Line level musical instruments with stereo outputs
such as Rhythm Machines or Samplers should also be connected to LINE inputs.
(18) MIC SOCKET
Connect your microphone with ¼" jack plug here. For permanent installations, we recommend to use the
socket on the rearpanel.
(26) REC OUT
To connect your record unit.
(20) MASTER OUT
Output sockets for connecting your power amplifier.
(21) POWER CONNECTION
Connect your 10 V power-unit here.
