00032440.DOC, Version 1.1
20/20
7.1 Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
8. TECHNICAL SPECIFICATIONS
EG-30A
EG-40A
EG-50A
Power supply:
230 V AC, 50 Hz ~
Power consumption:
50 W
70 W
90 W
Rated power:
20 W RMS
30 W RMS
40 W RMS
Power (max.):
30 W
50 W
70 W
Components:
2 x 3" woofer,
0.75" horn
2 x 4" woofer,
1" horn
2 x 5" woofer,
1" horn
Inputs:
3-pin XLR
Input sensitivity:
88 dB
90 dB
91 dB
Impedance:
4
Frequency range:
70 Hz - 18 kHz
60 Hz - 20 kHz
55 Hz - 20 kHz
Dimensions (H x W x D): 244 x 128 x 170 mm 322 x 160 x 230 mm 360 x 185 x 255 mm
Weight (piece):
3 kg
4 kg
5 kg
Please note: Every information is subject to change without prior notice. 09.09.2009 ©
