Omnitronic COMBO-150BT, Руководство пользователя

Страница: 35 / 40

35
Audio Player
The audio player can either be operated via the buttons on the front panel or via the remote control. When
actuating a button, always direct the remote control towards the sensor. There must be no obstacles
between remote control and the sensor. If the range of the remote control decreases, the battery is probably
exhausted and must be replaced.
1
Keep the button [ STOP/POWER ] pressed for two seconds to switch on the audio player. The display
shortly indicates a welcome screen “
WELCOME, PLEASE WAIT…
“, “; then “
NO DISK
“ comes on if no data
carrier has been inserted.
2
Insert a USB device into the USB port and/or a memory card into the card slot. Shortly press the button
[
MODE ] to switch between the data carriers.
3
After loading a data carrier, it is selected as the playback medium and read in. The display indicates the
total number of titles and “
PLEASE PUSH PLAY ”.
4
Start the playback with the button [ PLAY/PAUSE ] on the player or [► ] on the remote control. The
display indicates “► “. During the playback, the display indicates the elapsed time of the current title in
minutes and seconds. Additionally, the file name will be scrolling across the display.
5
Adjust the desired volume for the audio player with the level control [ MP3 VOLUME ]. Additionally, you
can use the buttons [ V+ ] and [ V- ] on the player (long actuation) or [ + ] and [ - ] on the remote control.
6
To interrupt the playback, press the button [ PLAY/PAUSE ] on the player or [► ] on the remote control.
The display indicates “ “. To stop the playback, press the button [ ]. The display indicates “ “. After
pressing the button [ PLAY/PAUSE ] or [► ], playback will start from the beginning of the title.
7
With the buttons [ NEXT ] and [ PREV ] on the player or [ ] and [ ] on the remote control you can skip
titles in forward or backward direction:
• short actuation of the button [ NEXT ] or [ ]
:
skip to the next title
• short actuation of the button [ PREV ] or [ ]
:
skip to the previous title
8
For direct selection of a title with the numerical keys [ 0-9 ] on the remote control, enter its number and
confirm with the button [ PICK SONG ].
Example: For title number 27 press keys [ 2 ], [ 7 ] and [ PICK SONG ].
9
With the button [ PRT/EQ ] on the player or [ ENTER ] on the remote control, you can activate random
play and repeat functions.
• first actuation: the titles are now played in random order (indication “ RANDOM “)
• second actuation: continuous repeat of the selected title (indication “ SINGLE “)
• third actuation: continuous repeat of all titles of the data carrier (indication “ ALL “)
10
Long repeated actuation of the button [ PRT/EQ ] on the player or short actuation of [ EQ ] on the remote
control selects an equalizer setting: “ POP “ , “ ROCK “ , “ JAZZ “ or “ CLASSIC “. When set to “ NORMAL “, the
frequency response is not affected.
11
To remove a USB device, disconnect it from the USB port. To eject a memory card, slightly press it into
the slot until it comes out and can be removed. Prior to removing a device, always terminate the
playback with the buttons [
PLAY/PAUSE
], [► ] or [ ]. Otherwise damage or loss of data may occur.
12
Keep the button [ STOP/POWER ] pressed for two seconds to switch off the audio player (indication “ BYE
BYE “).