Omnitronic CL-266, Руководство пользователя

Страница: 18 / 19

00033011.DOC 18/19
7. OPERATION
1. Switch the device on via the power switch. The power indicator lights up. Switch on the connected units;
always switch on your PA amplifier last.
2. Switch off the unit with the POWER switch after operation.
Suggested compressor/limiter settings:
ATTACK RELEASE RATIO
Vocals Medium to Fast Medium to Slow 2:1 to 4:1
Clicky Bass Fast Fast 4:1 or higher
Mushy Bass Medium to Slow Medium to Slow 4:1
Raging Electric Guitar Fast Slow 4:1 or higher
(more sustain)
Acoustic Guitar Medium to Slow Medium to Slow 4:1
Brassy Horns Fast Fast 5:1 or higher
Drums (kick, snare) Fast Fast 4:1
Drums (cymbals) Fast Slow 2:1 to 10:1
8. CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
8.1 Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.