1060225N_V_1_0.DOC
27/51
be equipped with a switch, button or fader that will connect the tip with the audio mass for starting the
playback and the sleeve for pausing the playback when the respective channel is activated.
6.10 END OF OPERATION
Before you switch off the device, please make sure that no CD remains in either player.
Also make sure that the CD trays are completely closed before you switch off. If this is not the case, switch
the device on again and close the tray with the OPEN/CLOSE BUTTON.
7. PRECAUTIONS
This CD player cannot be compared to conventional Hifi CD players - even if they have almost the same
appearance. This player is much more rugged in order to withstand the strenous road use and consistent
transports of mobile discotheques. We recommend to put the CD player on plastic foam or on rubber feet in
order to avoid skipping, which is caused by vibrations of low frequencies. The same thing holds true if the
CD player is mounted in a rack an the rack is exposed to such frequencies.
Should you have further problems, please refer to the chart below.
The adjustments of the Pitchfader change the FM frequencies. Should the display repeatedly show "ERR"
adjust the frequencies.
Have the connections correctly been carried out?
Is your amplifier and your mixer properly adjusted?
Have you kept to all instructions given in this manual?
SYMPTOMS
POSSIBLE CAUSES
SOLUTION
Device does not react when swit-
ching on.
Connection to mains disrupted.
Check AC plug and AC
connection.
Player does not start operation
CD is badly positioned or dirty
Reposition CD with label atop or
clean with a dry and soft cloth.
No sound
Check the mixer and amplifier
connections
Possibly exchange connections.
Does not read the program
The player is in normal playback
mode
Press the Play/Pause-button and
re-program
Pop noise
Mixer or amplifier connections
inapropriate
Check cable and jack quality
Faderstart does not work
Missing Audio Out-connection
Connect the Audio Out-sockets
with the Line-input sockets of your
mixer
8. CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
