background image

Specifications

Description

RuggedNet

®

 GHPoE/Si (60W Pre-BT)

10/100/1000BASE-T with Gigabit Fiber or Copper Uplinks
Ruggedized Unmanaged High-Power PoE Ethernet Switch

Standard Compliances

IEEE 802.3, 

IEEE 802.3af (15.40 watts max), 

IEEE 802.3at (30 watts max)

High Power 60W PoE

Environmental

REACH, RoHS and WEEE

PoE Modes

IEEE Alternate A (Alt A)

4-Pair

Frame Size

Up to 10,240 bytes

Port Types

Copper: 

RJ-45: 10/100/1000BASE-T

Fiber: 

Fixed:  ST, SC, LC 1000BASE-X Fiber 

 

SFP:  10/100/1000BASE-T SGMII Copper 

 Transceiver or 1000BASE-X Fiber  

 Transceiver

Cable Types

Copper: 

EIA/TIA 568A/B, Cat 5 UTP and higher

Fiber: 

Multimode: 50/125, 62.5/125µm

 

Single-mode: 9/125µm

DC Power Requirements

60W (Pre-BT)
+46 to +57VDC;  inclusive of tolerance
4.46A @ 56VDC
2 Pin Terminal (non-isolated)

Dimensions (W x D X H)

1.5” x 5.5” x 5.5” (38.1 mm x 139.7 mm x 139.7 mm)

Weight

1.70 lb.; 772 grams

Operating Temperature

Extended: 

-40 to 75°C 

Storage: 

-40 to 80°C

Humidity 

5 to 95% (non-condensing)

Altitude 

-100m to 4,000m (operational)

MTBF (hours)

273,000 

Warranty

5 year product warranty with 24/7/365 free Technical Support

Page 18

Page 17

Description

RuggedNet

®

 GHPoEBT/Si (60/100W BT)

10/100/1000BASE-T with Gigabit Fiber or Copper Uplinks
Ruggedized Unmanaged IEEE 802.3bt PoE Ethernet Switch 

Standard Compliances

IEEE 802.3, 

IEEE 802.3af (15.40 watts max), 

IEEE 802.3at (30 watts max)

IEEE 802.3bt (60 and 100 watts max)

Environmental

REACH, RoHS and WEEE

PoE Modes

IEEE Alternate A (Alt A)

4-Pair

Frame Size

Up to 10,240 bytes

Port Types

Copper: 

RJ-45: 10/100/1000BASE-T

Fiber: 

Fixed:  ST, SC, LC 1000BASE-X Fiber 

 

SFP:  10/100/1000BASE-T SGMII Copper 

 Transceiver or 1000BASE-X Fiber  

 Transceiver

Cable Types

Copper: 

EIA/TIA 568A/B, Cat 5 UTP and higher

Fiber: 

Multimode: 50/125, 62.5/125µm

 

Single-mode: 9/125µm

DC Power Requirements

60W Models:
+46 to +57VDC;   inclusive of  

                             tolerance
4.46A @ 56VDC
2 Pin Terminal (non-isolated)

100W Models:
+46 to +57VDC;   inclusive of  

                             tolerance
7.31A @ 56VDC
2 Pin Terminal (non-isolated)

Dimensions (W x D X H)

1.5” x 5.5” x 5.5” (38.1 mm x 139.7 mm x 139.7 mm)

Weight

1.70 lb.; 772 grams

Operating Temperature

Extended: 

-40 to 75°C 

Storage: 

-40 to 80°C

Humidity 

5 to 95% (non-condensing)

Altitude 

-100m to 4,000m (operational)

MTBF (hours)

273,000

Warranty

5 year product warranty with 24/7/365 free Technical Support

Содержание RuggedNet GHPoE/Si











Отзывы: