background image

Page 15

Page 16

Specifications

Description

RuggedNet

®

 10G/Mi

10/100/1000BASE-T with 1G or 10G Uplinks

Managed Industrial 6 or 10 Port 10Gigabit Ethernet Switch

Standard Compliances

IEEE 802.3, IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1ab, IEEE 802.1ax, 

IEEE 802.1w RSTP/MSTP, RFC 5424, RFC 4541, RFC 2710, 

 

IEC 624339-2, SMTP, SMS, SNTP, RADIUS, , IEEE 802.1x

Environmental

REACH, RoHS and WEEE

Management

IPv4 and IPv6 address

Web, Telnet, SSH, SNMPv1/v2c/v3

In-Band management via Ethernet port

Out-of-band management via serial port 

Frame Size

Up to 10,240 bytes

Port Types

Copper: 

10/100/1000BASE-T (RJ-45)

SFP/SFP+:  10GBASE-X Fiber Transceivers

 

10GBASE-T Copper Transceivers

 

1000BASE-X Fiber and Copper Transceivers 

10/100/1000BASE-T SGMII Copper Transceivers

Serial:            RJ-45 (RS-232)

Cable Types

Copper: 

EIA/TIA 568A/B, Cat 5 UTP and higher

Fiber: 

Multimode: 50/125, 62.5/125µm

 

Single-mode: 9/125µm

Serial:             Category 3 and higher

DC Power Requirements

4 RJ-45 Ports:

+12 to +57VDC;   inclusive of 

 

                             tolerance
0.86A @ 12VDC
0.22A @ 48VDC
2 Pin Terminal (non-isolated)

8 RJ-45 Ports:

+12 to +57VDC;   inclusive of 

 

                             tolerance
0.94A @ 12VDC
0.24A @ 48VDC
2 Pin Terminal (non-isolated)

Dimensions (W x D x H)

1.5” x 5.5” x 5.5” (38.1 mm x 139.7 mm x 139.7 mm)

Weight

4 RJ-45 Ports:

1.70 lb. (772 grams)

8 RJ-45 Ports:

1.77 lb. (803 grams)

Operating Temperature

Extended:  -40 to 75°C 
Storage: 

-40 to 80°C

Humidity 

5 to 95% (non-condensing)

Altitude 

-100m to 4,000m (operational)

MTBF (hours)

285,000

Warranty

5 year product warranty with 24/7/365 free Technical Support

Regulatory 

Compliances
(*Pending)

Safety*: 

UL 62368-1,

 

UL 60950-1,

 

IEC 62368-1,

 

IEC 60950-1,

 

EN 62368-1,

 

EN 60950-1,

 

CAN/CSA C22.2 No. 62368-1-14, 

 

CAN/CSA C22.2 No. 60950-1, 

 

CE Mark

EMC: 

EN 55032/24 CE Emissions/Immunity, 

 

IEC 61000-6-4 Industrial Emissions, 

 

IEC 61000-6-2 Industrial Immunity

EMI: 

CISPR 32, 

 

FCC 47 Part 15 Subpart B Class A

EMS: 

IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, 

 

IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m (on UTP cabling) 

 

 

and 20 V/m (on STP cabling)

 

IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, 

 

IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV, 

 

IEC 61000-4-6 CS: Signal: 10 V,

 

IEC 61000-4-8 ( Magnetic Field), 30A/m,

 

IEC 61000-4-11 (General Immunity in Industrial Environments)

IP Rating:  IP40 Protection

Customer Support Information

If you encounter problems while installing this product, contact Omnitron Technical 

Support:

Phone:   

(949) 250-6510

Fax: 

 

(949) 250-6514

Address:  

Omnitron Systems Technology, Inc.

  38 

Tesla

 

 

Irvine, CA 92618, USA

Email:  

[email protected]

URL:  

www.omnitron-systems.com

040-02902-001B    1/22

Содержание RuggedNet 10G/Mi









Отзывы: