Page 15
Page 16
Specifications
Description
OmniConverter
®
10GPoEBT/M
10/100/1000BASE-T with 1G or 10G Uplinks
Managed 6 Port IEEE 802.3bt PoE Ethernet Switch
Standard Compliances
IEEE 802.3, IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1ab, IEEE
802.1w, IEEE 802.1ax, RFC 5424, RFC 4541, IEC 624339-2,
SMTP, SNTP, RADIUS, , IEEE 802.1x
IEEE 802.3af (15.40 watts max), IEEE 802.3at (30 watts max)
IEEE 802.3bt (60 and 100 watts max)
Environmental
REACH, RoHS and WEEE
Management
Web, Telnet, SSH, Serial Console, SNMPv1/v2c/v3
PoE Modes
IEEE Alternate A (Alt A) and 4-Pair
Frame Size
Up to 10,240 bytes
Port Types
Copper:
10/100/1000BASE-T (RJ-45)
SFP/SFP+: 10GBASE-X Fiber Transceivers
10GBASE-T Copper Transceivers
1000BASE-X Fiber and Copper Transceivers
10/100/1000BASE-T SGMII Copper Transceivers
Serial: RS-232 (RJ-45)
Cable Types
Copper:
EIA/TIA 568A/B, Cat 5 UTP and higher
Fiber:
Multimode: 50/125, 62.5/125µm
Single-mode: 9/125µm
Serial: Category 3 and higher
AC Power Requirements
(Models with AC/DC Adapters)
100 - 240VAC 50/60Hz
3.5A max at 115VAC
2.5A max at 230VAC
DC Power Requirements
(Models with DC Terminals)
60W Models:
+46 to +57VDC; inclusive of
tolerance
4.47A @ 56VDC
2 Pin Terminal (non-isolated)
100W Models:
+46 to +57VDC; inclusive of
tolerance
7.33A @ 56VDC
2 Pin Terminal (non-isolated)
Dimensions (W x D x H)
6.28” x 5.2” x 1.5” (159.5 mm x 132.1 mm x 38.1 mm)
Weight
Module Only:
1.6 lbs. (735 grams)
Module with AC/DC Adapter: 3.7 lbs. (1703 grams)
Operating Temperature
(See Temperature Derating
Table)
Commercial:
0 to 50°C
Wide:
-40 to 60°C (-20°C AC cold start)
Extended:
-40 to 75°C - not available for models with
AC/DC power adapter
Storage:
-40 to 80°C
Humidity
5 to 95% (non-condensing)
Altitude
-100m to 4,000m (operational)
MTBF (hours)
Module Only:
272,000
AC/DC Adapter: 100,000
Warranty
5 year product warranty with 24/7/365 free Technical Support
2 year AC power adapter warranty
AC/DC Adapter Temperature Derating
Total Available Wattage to RJ-45 Ports
Model
Watts Required
40
°C
50
°C
60
°C
10GPoEBT/M 60W
240 watts
Full Power
175 watts
115 watts
10GPoEBT/M 100W
400 watts
240 watts
175 watts
115 watts
The AC/DC Adapter Temperature derating table is not applicable to models with DC Terminal
(see Ordering table for Direct DC -9 option). The DC Terminal models will provide full PoE
power over the operating temperature range of the module as long as the DC input power
meets the requirements stated in the specification table.
Regulatory Compliances
(Pending)
Safety:
UL 60950-1, UL-62368-1,
IEC 62368:2014 /A11:2017,
IEC 60950-1:2005+A1:2009, EN 60950-1:2006+A11:
2009+A1:2010+A12:2011 +A2:2013,
CAN/CSA C22.2 No. 60950-1,
CAN/CSA C22.2 No. 62368-1-14,
CE Mark,
EMC:
EN 55032/EN 55024 CE Emissions/Immunity,
EMI:
CISPR 32, FCC 47 Part 15 Subpart B Class A
EMS:
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV,
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m,
IEC 61000-4-4 EFT: Power: 1 kV; Signal:0.5 kV,
IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV,
IEC 61000-4-6 CS: Signal: 3 V,
IEC 61000-4-8 (Magnetic Field),
IEC 61000-4-11
IP Rating: IP20 Protection
Customer Support Information
If you encounter problems while installing this product, contact Omnitron Technical
Support:
Phone:
(949) 250-6510
Fax:
(949) 250-6514
Address:
Omnitron Systems Technology, Inc.
38
Tesla
Irvine, CA 92618, USA
Email:
URL:
www.omnitron-systems.com
040-03160-001A 7/20
