EN
Read these instructions carefully. No guarantee will
be allowed for wrong installation.
INSTALLATION
1. Assemble the frame (A, B and C). The height is
adjustable between 80 and 150 cm.
2. Attach the lower mounting profile (D) with the pins (l) to
the frame.
3. Determine the position of the frame on the vehicle. The
outer edge of the frame must be at least at 60 cm from
the vehicle side. Do not cover the number plate or the
lights.
IMPORTANT: Firstly check that the wall - where the bike
carrier is to be placed - is solid. If not, please reinforce.
4. Fix the wall hooks (a) at 60 cm from each other,
measured from centre to centre. In order to get a
waterproof installation, fill the holes made in the vehicle
with an acid free silicone paste.
5-6. Hang the frame onto the wall hooks and mark the
position of the lower mounting profile (D) on the wall. Pay
attention to leave under the profile, free space for the
rack.
7. Take away the frame, take off the lower mounting profile
and slide in the fixation screws (b) with the single bolt
plates (m).
8. Determine the position of the screws and drill 6.5mm dia
holes in the wall. Remark
-
the distance between the
coupled holes is 50mm. Use a counter plate (f) as drill
pattern. In order to get a waterproof installation, fill the
holes made in the vehicle with an acid free silicone paste.
9. Fix the lower mounting profile to the wall.
10. Stick the rubberplates (v) onto the hooks and hook on
the frame.
11. Fix the frame to the lower mounting profile.
12. Tighten the T-connections.
13. Insert the self tapping screw (g) in the T-piece.
14. Cover the screw by using the supplied logo plate.
15. Mount the rack (E) onto the frame.
16. Position the ladder strap (u) on the fixing point at the
rear of the wheel holder .
17. Fix the bike holders (n and o) to the cross tube.
USER REGULATIONS
OPENING AND CLOSING OF THE BIKERACK
- Make sure, when opening the bike rack, the clamp
has a grip on the underside of the frame.
Secure it
with the gliding bolt (fig. 18).
- When in the closed position, secure the bike rack with the
clip to prevent it from falling open (fig. 19).
INSTALLATION OF THE BIKES
- Mount the bikes in alternate directions on the rack.
- Install the heaviest bike closest to the vehicle.
- If necessary, the rails can be moved sideways, forwards
and backwards. To do this loosen the knob underneath
and retighten after positioning the bike rail.
Attention
: Turn to the right to loosen and to the left to
tighten (fig. 20).
- Slide the wheel blockings (fig. 21) against the bike wheels
(2), secure them (3) and secure the wheels with the straps
(4).
- Fix all bikes by using the bike holders supplied. The
clamps can be rotated for 360°. Ensure that the straps
are securely fastened to the crossbar of the bicycle (fig.
22).
SAFETY REGULATIONS
- Maximum load capacity: 60 kg (130 lbs).
- Fix the outer bike to the frame by means of the included
strap (p). See figure 23.
- Adapt driving style, especially on bends and uneven
surfaces.
- Check after a few miles that the frame is still completely
installed as it should be on the vehicle and also that the
bike rack is secure on the base frame. Also check that the
bikes are still secure. This should also be carried out at
regular intervals.
OPTIONS:
- 3rd rail kit, art no 60 0051 00.
- 4th rail kit, art no 60 0052 00.
- Elite top mounting rail, art no 60 0053 00.
- Cable lock for bike holder (fig. 24), art no 60 0041 00.
