DEVICE_MODEL_DESCRIPTION
0x0080
MANUFACTURER_LABEL
0x0081
DEVICE_LABEL
0x0082
FACTORY_DEFAULTS
0x0090
SOFTWARE_VERSION_LABEL
0x00C0
Category DMX512 Setup
DMX_PERSONALITY
0x00E0
DMX_PERSONALITY_DESCRIPTION
0x00E1
DMX_START_ADDRESS
0x00F0
SLOT_INFO
0x0120
SLOT_DESCRIPTION
0x0121
Category _Sensors
SENSOR_DEFINITION
0x0200
SENSOR_VALUE
0x0201
Category _Power/Lamp Settings
0x04xx
DEVICE_HOURS
0x0400
Category Display Settings
DISPLAY_INVERT
0x0500
Category _Configuration
PAN_INVERT
0x0600
TILT_INVERT
0x0601
Category _Control
IDENTIFY_DEVICE
0x1000
RESET_DEVICE
0x1001
Reload Default
With this function you can restore the factory settings of the device. The different settings (marked in the table)
will be set back to the default values (shaded).
Program
Play Slave Device
With this function, you can define the device as a slave. You can choose one of three different Slave programs.
For further information see “Edit Chase”.
Sequence
With this function, you can run the internal program. You can select the desired program under “Select Chase”.
You can set the number of steps under “Edit Chase”. You can edit the individual scenes under “Edit Scenes”.
With this function you can run the individual scenes either automatically, i.e. with the adjusted step time. The
20 of 25
