OmniPrint OM7212P, Руководство оператора

Страница: 6 / 26

When connecting or disconnecting the power supply from the printer, make sure that
the power supply is not plugged into an electrical outlet; otherwise you may damage
the power supply or the printer.
Battery is installed in your printer inside.
You can use your printer without ac adapter.
1. Make sure that the printer's power switch is turned off, and that the power supply's power
cord is unplugged from the electrical outlet.
2. Check the label on the power supply to make sure that the requird voltage matches that
of your electrical outlet.
3. Plug the power supply's DC cable connector into the printer's power connector as shown
below.
4. Plug the AC adapter's power cord into an electrical outlet.
NOTE
To remove the DC cable connector grasp the connector at the arrow and
pull it straight out. Make sure that the main unit's power cord is unplugged
before you disconnect the DC cable connector.
7
2-2. Connecting the Battery
You can use your printer with your belt
Fig is shown the method of use.
2-3. Connecting the belt
Chapter 2. Connection Power
2-1. Connecting the AC adapter to your printer
When the printer is used, use the optional AC adapter, PW-150K for your printer.
WARNING
Using an incorrect power supply may cause fire or electrical.
CAUTION
8
NOTE
Please use your printer without AC Adapter charger led is lights green.
RED
YELLOW
Belt
Belt Clip