OmniPrint OM7212P Скачать руководство пользователя страница 2

Safety Precautions 

In using the present appliance, please keep the following safety 
regulations in order to prevent any hazard or material damage. 

 

   

Violating following instructions can cause serious injury or death.

 

Do not plug several products in one 
multi-outlet. 

 This can provoke over-heating and a fire. 
 If the plug is wet or dirty, dry or wipe it before 

usage. 

 If the plug does not fit perfectly with the 

outlet, do not plug in. 

 Be sure to use only standardized 

multi-outlets.

 

 

             

 

You must use only the supplied adapter. 

 It is dangerous to use other adapters. 

 

 

       

 

Do not pull the cable to unplug. 

 This can damage the cable, which is the 

origin of a fire or a breakdown of the printer. 

 

                  

 

Keep the plastic bag out of children’s 
reach. 

 If not, a child may put the bag on his head. 

 

                  

 

 

Do not plug in or unplug with your hands 
wet. 

 You can be electrocuted.

 

 

                    

 

Do not bend the cable by force or leave it 
under any heavy object. 

 A damaged cable can cause a fire.

 

 

        

 

 

If you observe a strange smoke, odor or 
noise from the printer, unplug it before 
taking following measures. 

Switch off the printer and unplug the set from 

the mains.  

After the disappearance of the smoke, call 

your dealer to repair it.

 

 

 
 
 

     

  

 

WARNING

 

PROHIBITE

PROHIBITE

PROHIBITE

ONLY SUPPLIED ADAPTER

PROHIBITE

PROHIBITE

TO UNPLUG

PRINTER

 

 

 
 
 

  

Violating following instructions can cause slight wound or damage the appliance.

 

Keep the desiccant out of children’s 
reach. 

 If not,  they may eat it.

 

 
 

                

 

Install the printer on the stable surface. 

 If the printer falls down, it can be broken and 

you can hurt yourself.

 

 

 
 

               

 

Use only approved accessories and do 
not try to disassemble, repair or remodel it 
for yourself. 

 Call your dealer when you need these 

services.

 

 
 

 

 
 

      

 

Do not use the printer when it is out of 
order. This can cause a fire or an 
electrocution. 

 Switch off and unplug the printer before 

calling your dealer.

 

 

                    

 

Do not let water or other foreign objects in 
the printer. 

 If this happened, switch off and unplug the 

printer before calling your dealer.

  

 

 

             

 

 

 

WARNING

PROHIBITE

PROHIBITE

PRINTER

 

PRINER

DISASSEMBLING 
PROHIBITED

 

PRINTER

PROHIBITE

PRINTER 

DEALER

 

TO UNPLUG

Содержание OM7212P



























Отзывы: